Ac Repair in Point TX 75472

HVAC Repair

(877) 713-2629

Point, TX

  • Highly Rated
  • Quality Service
  • Affordable Prices
  • 100% TX Licensed Experts
open 24 hours - 7 days a week

(877) 713-2629

schedule an inspection & free quote

Point HVAC Repair426 Reviews.
Ac Repair,Ac Repair Cost,Furnace Service Near Me
Point HVAC Repair
Point, TX 75472 USA
Phone: (877) 713-2629

Call Now

(877) 713-2629

open 24 hours - 7 days a week

Point TX 75472 Point TX 75472
Home > Texas > Ac Repair in Point TX 75472

Accompany Point TX

With all the types and sizes available, replacing a HVAC coil can be intimidating. Keep in mind that 95% of the overall HVAC coil cost is the finned surface area, number of rows and fins per inch. Casing dimensions, coil depth, connection sizes and header sizes only account for 5% of the overall cost.

10 Simple HVAC coil facts:

 

  1. If you eliminated the fins and only used the tubes, you would Heating And Air Conditioning Point TX only get about 30% of the performance compared to the same HVAC coils with fins. The fins impact heat transfer much more than the tubes.
  2. Because steam is erosive, steam coils are often constructed differently then hot water coils. Water and steam coils cannot always be used interchangeably. Some duct booster coils can be used with hot water or steam. Be aware that the steam should NOT be modulated through Point TX this type of coil if it will be exposed to below freezing air temperatures. As the valve modulates down, there is not enough pressure to push the condensate through this type of coil. If you are using steam in a hot water booster coil, you should choose 2 position control (on/off). Modulating type steam coils, aka “non-freeze” steam coils should not be used with hot water.
  3. The industry has arbitrarily Heating And Air Point TX named 1 and 2 row coils “hot water HVAC coils” and 3 – 10 row coils “chilled water HVAC coils”. Hot water coils and chilled water coils are constructed the same. Hot water temperatures are much higher than the air temperature, resulting in a coil with fewer rows. Chilled water temperatures are very close to the air temperature, resulting in a much deeper coil.
  4. Chilled water and DX (direct expansion) Point TX HVAC coils are identical except for the supply and return arrangement. You can’t feed refrigerant through a M.P.T. (male pipe thread) connection and header arrangement. You have to replace the standard hydronic feed with a refrigerant distributer. The “spaghetti tubing” connected to the distributer feeds as many tubes as you want it to feed. Beyond that, chilled water and DX HVAC coils are identical.
  5. Fins have corrugations that run the Point TX entire height and depth of each fin. Fins are not flat. Corrugations promote turbulence, increasing the surface area and coil efficiency. Corrugations also help in preventing moisture carryover which is very common with chilled water HVAC coils running at face velocities higher the 550 FPM.
  6. When you look at HVAC coils, you can see that the fins are rippled. This is another way to mix up the air, causing more Point TX turbulence which creates more heat transfer, increasing coil efficiency.
  7. Most HVAC coils last 15-20 years. HVAC coils can last as long as 30 years if they are properly maintained. Proper maintenance includes regular cleaning on the airside, and proper treatment of the fluid passing through the tubes.
  8. 5/8″ tube chilled water coils use more tubes per row than ½” tube chilled water coils. The ½ tube coils have more finned Point TX surface area, but the thicker 5/8″ tubes take up more surface area. The performance of the two different HVAC coils is similar. People often choose the 5/8″ tube coil due to its slightly lower water pressure drop and thicker tube wall thickness.
  9. Since you pay for copper by the pound, you will pay more for a 5/8″ tube coil than a 1/2″ tube coil. This is because the wall thickness Point TX on a 5/8″ tube coil is 10 – 15% more than a comparable 1/2″ tube coil. Even though the performance is the same, you will pay more for a 5/8″ tube coil. One could claim that a 5/8″ tube coil will outlast a 1/2″ tube coil.
  10. 95% of the overall cost of HVAC coils is the finned surface area, number of rows and fins per inch. Casing dimensions, coil depth, Point TX connection sizes and header sizes only account for 5% of the overall cost. Changing the materials can have a huge impact on the overall cost. Stainless steel casings and copper fins are very common in corrosive environments. The material costs are higher, and the heat transfer properties of different materials will affect the size of the coil. If you change the fins to copper, you will lose about 15% of Point TX the capacity, which means you will need a bigger coil.

HVAC Coil templates specific to your application can be downloaded and printed. Bring these templates to your jobsite, mark them up, and fax them to your manufacturer. They will use your template to build an exact duplicate.

 

 

Air Conditioning Service Point TX

 

When it comes to fixing your AC during summers, you do not think much about anything and just dial the first number that you come across. Doing so sounds fine at the moment, but the services you get are often unreliable in this manner. Therefore, it is always better to have some numbers of air conditioning repair services so that you can call Furnace Repair Near Me Point TX them in time of need.

You can find reliable air conditioning repair services through a number of sources. The best way is to ask references for an ac service providers. If any of your neighbors have recently acquired air conditioning repair services, then you can ask them for the number. However, before you do so, it is essential that you ask your neighbors whether Point TX or not they are satisfied with the services provided.

The main problem is that, whatever they do, it gets broken again within no time. Therefore, you need someone reliable who can provide your proper services that will ensure your AC works a long time without facing any more problems.

Before you decide to hire any company, you must note down all the problems and their Heating And Air Conditioning Repair Point TX detail. Use a notebook for this purpose. This will help you ensure that the services you get are complete and take care of all the problems with your AC unit.

Often time people forget that their AC is still in warranty. Check if your AC is still in warranty and if it is, find the nearest authorized repair center. You can do so by Point TX calling the customer service number provided on the manual of the AC.

If you do not have warranty then you should get back to finding AC repair services the old fashioned way and that is asking for referrals. Other people who have recently used such services can help you a lot in finding quality AC repair services.

If the AC repair service provider accepts credit Point TX card payments then things can work well in your favor. This is because if you are not satisfied with the services provided, you can stop the payment by calling the credit card company. The credit card company will take your side on this matter and you will get quality services for the amount you paid.

Make sure to use these tips when you are Point TX looking for reliable air conditioning repair services to repair your AC for the upcoming summer season.

 

Hvac Maintenance Point TX

 

Home HVAC (Heating Ventilating Air Conditioning) systems in most climates will be a major user of energy. In warm climates it can account for 60% or more of your total electric bill. If your system is ten years old or older it is a prime candidate for an upgrade. Air Conditioning systems are rated by SEER (Seasonal Energy Efficiency Ratio). This is Hvac Contractors Point TX sort of like a cars MPG rating. The higher the number the more energy efficient and less power it will consume for the amount of cooling compared to a lower SEER rated system. A system 10 years old or older were likely rated 10 SEER or less when new. As they age they can lose efficiency due to compression loss and heat Point TX transfer restrictions like a dirty or damaged coil. If you have an older unit in need of repairs you might be tempted to spend the few hundred or few thousand dollars it may take to get it up and running rather than the thousands it would take to replace with a high efficiency system. Repairs can many times be the best alternative Ac And Heating Point TX with a tight budget or in a case where you don’t plan to stay in the home long enough to get a ROI (return on investment) from the new system.

But in the long run it can cost more to repair an older unit then replacing. If you have an average 2,000 square foot home with a 4 ton air conditioning unit, it Point TX could cost somewhere around $5,000.00 to replace plus or minus a thousand or so depending on the grade of equipment and what all is involved with the installation. If this hypothetical system needed repairs in the typical $600-$1,000.00 range it might seem like you save around $4000.00 by repairing instead of replacing. But you have to factor in operating cost and future Point TX repair and maintenance to get a true cost comparison. If your system is starting to need repairs in that price range the chances are good that year after year it is going to need even more repairs as it ages. If you are adding refrigerant because of a leak and not repairing the leak you are guaranteed at least one, but probably Point TX several service calls a year to keep it cooling. Finding and repairing small pinhole leaks in the coil can cost a lot as well. Repairing coil leaks can be very difficult. When the coil starts to leak it is likely there are many small pinhole leaks in the tubing where the fin makes contact with the tubing. This is due to electrolysis Point TX caused by contact of two dissimilar metals and the presence of VOCs (Volatile Organic Compounds) that have condensed onto the coil that contribute to the formation of these pinholes. Repairing them is a tricky process and can result in less than desired results. Repairing one leak can just open another one nearby. Even if you are successful the efficiency of the system Point TX can never be returned even to its original low 10 SEER rating much less improving it. Charging a leaking system to “get by” also just contributes to the cost of operating that system. You have the service costs plus the increased operating cost as the system losses refrigerant and become less and less efficient.

So let’s look at that $5,000.00 system verses maintaining Point TX your old system over a period of just five years. Up front we already know you will have an expense of about $1,000.00 to get the system even operating at a low efficiency level. So now we are down to $4,000.00. Now let’s say you average a very modest projected $350.00 in maintenance and service cost for years 2 to 5. Now Point TX that new system is costing you just $2,600.00. Most systems will have a 10 year parts warranty so even if something did fail at least the parts would be covered. The labor for repairs on the new system will be at least 1 year and up to 10 years can be added for around $500.00 on most systems.

We haven’t even talked about Point TX energy cost savings yet. According to operating cost comparison software using 0.11 cent a kilowatt hour and a modest increase in rates of 3% a year you would save $2,092.00 on air conditioning cost by upgrading to an Energy Star rated 14 SEER system from 10 SEER system. And this is assuming your a 10 SEER system is still operating at 10 Point TX SEER. I can tell it won’t be. Savings will vary.

According to the same cost comparison software, government studies have also shown an increase in home value of around $7,800.00 by making this upgrade. When we expand the time frame out to the expected average life span of the system to 20 years your savings is over $10,000 in operating costs.

So waiting till Point TX that old system completely fails to replace it can cost you much more in energy cost and comfort then replacing it now.

 

Central Heat And Air Point TX

 

The soothing warmth of hot air blowing out of a vent as a blizzard rages outside, the blessed relief of an air-conditioned room after yard work in the summer-these are the happy endings of everyday life. When Hollywood takes on HVAC, sometimes sparks (or entire hotels) fly. These movies used boilers, ventilation shafts, and furnaces to increase the drama, but how realistic are their performances?

Boilers

Boilers Hvac Contractors Point TX produce evenly radiating warmth by heating water. They’re one of the oldest ways to heat a building, and they’re typically used in big businesses like hotels. In “The Shining,” mini-series Steven Weber’s Jack Torrance fails to release steam from the faulty boiler at the Overlook Hotel (he’s busy terrorizing his wife and child) with disastrous consequences. The entire five-star hotel explodes, and he’s killed in Point TX the blast.

In “The Preacher’s Wife,” Reverend Henry Biggs is plagued by job stress, including an aging church building whose boiler is loud at the best of times and downright dangerous at the worst. Denzel Washington’s angelic Dudley can bring Reverend Biggs peace, with a little help from Whitney Houston. In an interesting coincidence, the church used in filming also needed a new boiler in real Furnace Repair Near Me Point TX life, which its congregants were able to buy with the rent money from the production company.

Just how dangerous are poorly maintained boilers? It depends on when it was made. A modern boiler has sensors to catch problems early, and if something goes terribly awry, have fail-safes that shut them off automatically. Older boilers that lack these safety mechanisms and newer boilers whose fail-safes stop working Point TX can indeed explode, severely damaging the structure of a home as they shoot off their base at high speed and spray super-heated water along their path. The more common danger, however, inadequate or blocked ventilation, that can cause a buildup of carbon monoxide gas. Carbon monoxide gas is odorless, colorless and deadly. With proper maintenance, boilers are safe and effective. The residents of the Overlook Point TX and Reverend Biggs could have saved a lot of trouble by shutting their boilers off, bundling up in coats and waiting for an HVAC repair service.

Ventilation Shafts

Screenwriters love ventilation shafts. While ventilation shafts feature in a lot of television shows, including episodes of “Chuck,” “It’s Always Sunny in Philadelphia,” and “My Name is Earl,” Hollywood saves the dramatic HVAC escapades for the movies. In an Point TX iconic scene from “Mission: Impossible,” Tom Cruise’s Ethan Hunt climbs through a ventilation shaft and is lowered by a co-conspirator into the inner sanctum of CIA headquarters to retrieve a top-secret list of IMF operatives from a heavily-guarded computer (for the greater good, of course).

In “Toy Story 2,” a brave team of toys uses an elevator shaft and air ducts to sneak into the apartment/rare Point TX toy hoard of Al McWhiggin and rescue Woody, a valuable collectible cowboy doll voiced by Tom Hanks.

Air duct travel is pretty impractical. Sharp sheet metal edges, vent size, fans that obstruct vent and the sound produced by a human crawling through a metal tube all make an infiltration of the CIA headquarters seem truly impossible. Surely the CIA would safeguard against tactics its agents commonly Point TX used anyway. Surprisingly, though, in 1961, three prisoners successfully escaped from Alcatraz Federal Penitentiary by climbing through air ducts. Frank Morris, along with his brothers Clarence and John Anglin, traversed a plumbing maintenance shaft and climbed through a ventilation shaft to escape the prison and flee from the island in a homemade rubber raft. They were presumed to have drowned in the attempt, though reported Point TX sightings of the fugitives persisted for decades.

Furnaces

While air conditioning units have yet to make their big break, furnaces have enjoyed their share of film fame. Tom Hanks suffers furnace trouble in both “Apollo 13” and “The Burbs.” In the docudrama “Apollo 13,” Hanks is Jim Lovell, Commander of the Apollo 13 space mission. After a catastrophic oxygen tank failure on the ship, Jim Lovell and Point TX his crew must try to survive and return to Earth. With limited resources, the crew must conserve electricity and shuts off the heating system. The freezing temperatures that ensure make the tense situation miserable.

In “The ‘Burbs,” Hanks is a suburban dad who becomes suspicious of his next-door neighbors. His suspicion is justified when his investigations reveal that the neighbors have been using a giant, cast-iron Point TX basement furnace that heats up to 5,000 degrees to incinerate the evidence of their murderous activities.

“Apollo 13” is a dramatic telling of a true story, and the freezing conditions of the crew appear to have been true to life. The furnace from “The ‘Burbs” is another story. Aside from the feasibility issues of getting a giant iron furnace into a small basement, it’s so hot Point TX that without proper shielding, it would probably burn the house down around itself. The typical home furnace (even a hot one) is not going to double as an in-house incinerator.

 

Heating And Air Conditioning Repair Point TX

 

Repairing any heating or air conditioning unit will cost you money. But, hiring the right HVAC repair technician can also save you money in the long term if you know what to look for and how to go about it.

HVAC repair technicians should first of all be certified or licensed by the state. They should provide proof of this certification in either the advertisement that you read or provide the Furnace Service Point TX information on a business card with their license or certification number. You can check this with the governing bodies for HVAC service providers to see if their license is current or if there have been any problems in the past.

The next thing you will want to make sure of it that they are bonded. A bond is basically insurance that protects the customer from unnecessary financial distress in the case Point TX of faulty products or services. They should also be insured to protect themselves as well in case of any mishaps or lawsuits filed against them. This insurance will also guarantee that you will receive adequate compensation in case anything goes wrong during the repair service.

Does the technician belong to any trade associations? They should be a member of a trade association as further proof of their skills and commitment to Ac And Heating Point TX the job. Membership in these types of organizations will let you know that they are more than capable of handling the job because they get the latest updates on techniques and new equipment that comes out on the market and they will be able to pass this knowledge along to their customers.

Does the company that they work for do criminal background checks? This is important because you want a reputable Point TX service provider that you can trust in your home. Companies will usually do a criminal background check before they hire any employees. You want to ask this question before you contract them for services. If they do not do background checks on their service representatives then it is better to find a company that does.

There is also the factor of whether or not the company endorses a drug and alcohol Point TX free work place. This is important as well and you also want to make sure that they comply with current laws regarding this.

All of these factors in selecting a good company and service provider are important to make sure that you receive quality service. It can also save you money in the long term because you will be ensured that the repairs are done right the first time. If you Point TX do not check into the company or the provider you may be left to foot the bill with even more costly repairs due to faulty service.

  • Ac Repair in Childress TX 79201
  • Ac Repair in Richardson TX 75080
  • Ac Repair in Weslaco TX 78596
  • Ac Repair in Hitchcock TX 77563
  • Ac Repair in Sabinal TX 78881
  • Ac Repair in Sandia TX 78383
  • Ac Repair in League City TX 77573
  • Ac Repair in Jasper TX 75951
  • Ac Repair in Arlington TX 76001
  • Ac Repair in Devine TX 78016
  • Local Results

    • 1st Choice Heating & Air Conditioning | San Antonio, TX ...


      Over our years in the HVAC industry, we have learned which companies manufacture the top equipment for your home or business. We take into consideration quality, longevity, frequency of repair, price point, and energy efficiency and then, make the perfect fit between you and the AC or furnace that meets your requirements.
    • HVAC Repair and Equipment Sales Near Me | Lennox


      Lennox provides the best in home heating and systems with top of the line HVAC systems, furnaces, air conditioners, and many other home heating & air products.
    • Ellis Air Systems Inc. AC Repair Killeen TX


      Property Management companies. As our owner and founder of Ellis Air Systems says “We sell service, not excuses.” – Fred Ellis. So, with Ellis Air Systems, you can always expect the best HVAC parts, HVAC systems, and HVAC technicians for your satisfaction.
    • 25 Best Air Conditioning and HVAC Services - San Antonio TX


      Hire the Best HVAC and Air Conditioning Contractors in San Antonio, TX on HomeAdvisor. We Have 3039 Homeowner Reviews of Top San Antonio HVAC and Air Conditioning Contractors. Get Quotes and Book Instantly.
    • AC Repair Installation Service | Heater Service Houston ...


      My A/C unit isn’t cooling My A/C unit isn’t running My thermostat screen is blank My house is muggy & sticky inside even with the air on My outdoor unit is making a noise
    • Mr Cool HVAC - Austin, TX - Yelp


      111 reviews of Mr Cool HVAC "Brian Weiss, the Owner of Mr. Fix It and Mr. Cool Air Conditioning oversaw the installation of a new Carrier Infinity System from start to finish earlier this year. Then he returned after the installation for a final…
    • 24/7 Plumber and AC Repair in Houston, TX | ARS/Rescue Rooter


      For fast, professional air conditioning repair and plumbing services in greater Houston, count on ARS/Rescue Rooter. Residential and Commercial. Available 24/7!
    • HVAC Service Contracts: A Waste of Money? | Angie's List


      Service contracts are agreements between you and an HVAC service provider wherein you pay a set fee to guarantee the company's ongoing services for your HVAC system.. With the most basic contracts, the service includes a checkup and tune-up emphasizing your heating system at the start of the winter and air conditioning system before summer.
    • Air conditioning - Wikipedia


      Air conditioning (often referred to as AC, A/C, or air con) is the process of removing heat and moisture from the interior of an occupied space, to improve the comfort of occupants. Air conditioning can be used in both domestic and commercial environments. This process is most commonly used to achieve a more comfortable interior environment, typically for humans and animals; however, air ...
    • Top 10 Best Charleston SC HVAC Contractors | Angie's List


      Find Top-Rated Charleston HVAC Contractors There are 50 top-rated hvac contractors in your area.

    Cash & Check Our Point HVAC Repair experts accept all forms of cash and checks payments.

    Credit Card Yes, credit card payment is accepted by our Point experts.

    Offers & Discounts Special offers may be available in Point TX. Ask when you call.

    Other Options Other payment options may be available. Please call for more info.